Emerson Radio SM51TR - Manual (Page 15)

14
1. Press the POWER button to turn the system ‘On’.
2. Select the source by pressing the desired source
selector button:
• Press TUNER button to listen to a radio station.
• Press TAPE button to play cassette.
• Press CD button to listen to a compact disc.
• Press PHONO / AUX button to select turntable
function or listen to audio source of laser disc
player, camcorder or VCR etc.
3. Press the VOLUME button on the front panel or on
the remote control to adjust the volume level up or
down.
4. Press the EQ button repeatedly to select a preset
equalizer mode: ROCK , CLASSIC, POP or FLAT.
NOTE:
The Graphic Equalizer separates and adjusts the bass,
midrange and treble levels. These preset selections
adjust the sound to simulate and enhance the
acoustical effects of ROCK, CLASSIC, POP or FLAT.
5. Press the MUTE button to mute the sound. The
MUTE indicator will illuminate. Press again to return
to original sound level.
1. Turn the system on and press the MODE / REMAIN
button until the clock appears in the display.
2. Press the MEMO / C-ADJ button one time and hour
digit will flash .Then press the TUNING DOWN /
PREVIOUS or TUNING UP / NEXT button to adjust
the correct hour time. Observe AM or PM hour.
3. Press the MEMO / C-ADJ button again and minute
digit will flash. Then press the TUNING DOWN /
PREVIOUS or TUNING UP / NEXT button to adjust
the correct minutes.
TIMER ON SETTING
1. Turn the system ‘On and press the MODE / REMAIN
button twice until the Time ON appears.
2. Press the MEMO / C-ADJ button one time and hour
digit will flash. Then press the TUNING DOWN /
PREVIOUS or TUNING UP / NEXT button until the
correct hour is set. Observe AM or PM hour.
The system can automatically turn itself ‘On’ or ‘Off’
when the ON or OFF time arrives.
OPERATING INSTRUCTIONS
CLOCK SETTING
TIMER ON / OFF SETTING
GENERAL
SM51TR.p65 2001/7/3, PM 02:23 14