E-MU Tracker Pre USB 2.0 - Manual (Page 22)

Tutorials
22 E-MU Systems
NOTE
Turning on the metronome
adds a 2-bar lead-in before
recording begins.
7. Optional Step - Metronome: To toggle the Metronome on and off, press C on
the computer keyboard. To adjust the metronome output level, press the
transport Play control, then select Metronome Setup... from the Transport
menu. Use the volume slider to set the desired metronome level.
8. Press the Go to Previous Marker / Zero button.
9. Make sure the Record Enable button on the track is on (it should be on by
default).
10. Press the Record button on the Cubase transport control panel. The button
turns red and you’re recording.
11. When you’re finished recording your track, press the Spacebar, or press the
Stop button on the Cubase Transport Control.
12. Press the Go to Zero button.
13. Press the Spacebar or press the Play button to play back your new Track.
Record Another Track
14. Press the Go to Zero button.
15. Drag the audio chunk you just recorded down below itself and release the
mouse button. A new track is automatically created with your recording. This
is a quick and easy way to set up a new track in Cubase. Now you’re all set to
record again on Track 1.
16. Press the Record button on the Cubase transport control panel and you’re
recording again. You’ll hear your first track playing along with you.
17. Repeat steps 12-14 to record more audio tracks.
18. Press the Mute button to silence any tracks you don’t want to hear.
Record Enable
Record
Play Stop Go to Start
Drag