Casio Cassiopeia EM-500 - Manual (Page 25)

25
Using a MultiMediaCard
Your CASSIOPEIA supports MultiMediaCards.
Important
• The card slot cover will not close when certain types of cards are in the slot.
• Gently but firmly slide the card into place as far as it will go, but do not force it.
Forcing a card can damage connectors. If you have problems inserting a card, pull it
out and check to make sure it is oriented correctly.
• We strongly recommend that you store all unsaved data you are inputting or editing
before performing this procedure.
• Sometimes, your CASSIOPEIA may not be able to detect a MultiMediaCard. This is
indicated when a program on the card does not start up normally. When this happens,
remove the card, reinsert it, and then press the RESET button.
1. Make sure your CASSIOPEIA is turned off.
• Press the [Power] button to turn off power.
2. Open the cover.
• Slide the card lock switch to the FREE position.
3. If there is already a card in the slot, press in on the card and then remove it.
4. Slide the card you want to use into the card slot.
• Make sure the top of the card is facing towards the top of the CASSIOPEIA unit. A
card that is not oriented correctly will not slide all the way into the slot.
Carefully slide the card into the slot as far as it will go.
• Slide the card lock switch away from the FREE position to lock the card into place.
5. Close the card slot cover.
Bottom
Top