Enlarging/reducing using custom copy ratios, Enlarging/reducing using custom copy ratios -5, 11 enlarging/reducing using custom copy ratios 1 – Canon L380S User Manual
Page 124
Advertising
Setting Enlarging/Reducing
11-5
Making Cop
ies
11
Enlarging/Reducing Using Custom Copy Ratios
1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Enlarge/Reduce] twice.
3
Use the numeric buttons to enter the copy ratio
➞ press [OK].
•
You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
•
Even after entering the copy ratio, you can use [
(-)] or [
(+)] to adjust the copy ratio. To increase the copy
ratio, press [
(+)]. To decrease the copy ratio, press [
(-)].
NOTE
To reset the copy ratio, press [Enlarge/Reduce] several times to display <DIRECT 100%> ratio
➞ press [OK].
Z O O M 5 0 - 2 0 0 %
- 1 0 0 % +
➞
Z O O M 5 0 - 2 0 0 %
- 8 0 % +
8 0 % A 4
T E X T
01
Advertising