Mounting the speakers – SoundMax SM-CSM503 User Manual

Page 3

Advertising
background image

3

Make absolutely sure that the terminals for the speakers are connected to the proper outputs from the music
source.
Never run the wiring on the outside of the vehicle or under it where it can be damaged by road hazards or the
moving parts of the vehicle. Use existing wire channels, sills, panels and molding strips inside the vehicle to

hide the wiring for safety and a neat appliance.
Make sure the wire of the negative pole terminal is disconnected from accumulator while connecting the
speaker terminals. Turn on the various components and slowly increase the volume. Remember to check and
re-check all connections to ensure proper installation and use.

Do not continuously use the speaker system beyond the nominal power handling capacity.
Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system
to protect them from damage caused by the magnets in the speakers.
If you cannot find the appropriate mounting location, consult your car dealer or your nearest dealer before

mounting.

CAUTION: Take extreme caution when working near the gas tank, gas lines, brake or hydraulic lines and
electrical wiring.

Mounting the speakers

Installation kits are available from your dealer or local stereo shop to help make your installation easy. These kits
also give your installation a clean, custom appearance. In case you have any questions about installations
methods please consult a professional auto sound dealer/installer for assistance.

Choose the place of installation for acoustic system. For most acoustic system stipulated regular places in the
automobile approach. In this case you need to know only assembly depth. Before installation acoustic system
check up their assembly depth.
At a choice of a non-standard arrangement of speakers at which it is necessary to cut them in panels of the

automobile, use a mould (not included). For achievement of ideal arrangement of acoustic system keep up
geometry of a mould, as it is very important for correct installation of your system (

=112 mm, Ø =5

mm).

Advertising