Canon MF5770 - Manual (Page 27)

4-7
Sending F
a
x
e
s
4
● If you selected <ON>:
❑
Press [OK] twice.
❑
Press [ (-)] or [ (+)], or use the numeric keys to enter the number of times you want the machine to redial ➞
press [OK] twice.
You can set the machine to redial between 1 to 10 times.
❑
Press [ (-)] or [ (+)], or use the numeric keys to enter the time interval between redialing ➞ press [OK].
You can set the time interval between 2 to 99 minutes.
6
Press [Stop/Reset] to return to the standby display.
Sending the Same Document to Several Recipients
(Sequential Broadcasting)
The machine allows you to send the same document to a maximum of 112 recipients in one operation.
NOTE
If you frequently send documents to the same group of recipients, you can group these numbers for group dialing.
This will allow you to send documents to all recipients in the group at the press of one or a few keys.
1
Place the document on the platen glass or load it in the ADF ➞ press [FAX].
For details on how to place or load documents, see Chapter 3, "Document Handling," in the User’s Guide.
2
Adjust any necessary settings for your document.
•
Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality (Fax Resolution)," on p.
4-3.)
•
Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Scan Density)," on p. 4-3.)
3
Enter the fax/telephone numbers you want to send to.
● To use one-touch speed dialing:
❑
Press the one-touch speed dialing key(s). You can dial up to 11 destinations.
● To use coded speed dialing:
❑ Press [Coded Dial] ➞ use the numeric keys to enter the two-digit code. You can dial up to 100 destinations.
NOTE
Repeat the step above to enter the other codes if necessary.
R E D I A L T I M E S
2 T I M E S
➞
R E D I A L I N T E R V A L
2 M I N .
R E D I A L I N T E R V A L
4 M I N .
➞
T X S E T T I N G S
4 . T I M E O U T