Canon MF5770 - Manual (Page 38)

6-3
R
epor
ts an
d Lists
6
Adjusting the ACTIVITY REPORT Setting
You can set the machine to turn on or off automatic printing of the ACTIVITY REPORT.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <FAX SETTINGS> ➞ press [OK].
3
Press [ (-)] or [ (+)] to select <REPORT SETTINGS> ➞ press [OK].
4
Press [ (-)] or [ (+)] to select <ACTIVITY REPORT> ➞ press [OK].
5
Press [ (-)] or [ (+)] to select the setting you want ➞ press [OK].
You can select from the following:
- <OUTPUT YES> to turn on automatic printing of the ACTIVITY REPORT
- <OUTPUT NO> to turn off automatic printing of the ACTIVITY REPORT
6
Press [Stop/Reset] to return to the standby display.
Adjusting the TX REPORT Setting
The machine can print a TX (transmission) report (TX REPORT or ERROR TX REPORT) after sending
a document. You can set it to print every time it sends a document, or only when an error occurs.
Alternatively, you can disable printing the report. By default, the machine is set to print a TX report only
when an error occurs.
■ TX REPORT
*********************
*********************
***
*** T X R E P O RT
TRANSMISSION OK
TX/RX NO 0004
RECIPIENT ADDRESS 1 432 2060
DESTINATION ID
ST. TIME
01/02 17:52
TIME USE 00' 11
PAGES SENT 1
RESULT OK
01/02 2005 17:52 FAX 1234567 CANON 001