Crestron electronic DIN Rail Universal Dimmer DIN-1DIMU4 - Manual (Page 18)

DIN Rail Universal Dimmer Crestron DIN-1DIMU4
Hardware Hookup
Make the necessary connections as called out in the illustration that
follows this paragraph. Refer to “Network Wiring” on page 11 before
attaching the 4-position terminal block connector. Apply power after all
connections have been made.
When making connections to the DIN-1DIMU4, use Crestron power
supplies for Crestron equipment.
Hardware Connections for the DIN-1DIMU4
NET:
To Control System and Other
Cresnet Devices
NEUTRAL:
Neutral Connection
from AC Power Line
DIMMED LIVE (1 - 4):
Dimmer Channel
Outputs
Ground
OVERRIDE:
From Device Providing Override Signal &
to Other Devices Receiving Override
Signal
LIVE:
Line Power Input from AC
Power Line
With the circuit breaker turned off, connect the wires to the terminal
blocks per the markings provided on the DIN-1DIMU4.
14
• DIN Rail Universal Dimmer: DIN-1DIMU4 Operations & Installation Guide – DOC. 6668D