EVCO c-pro giga - Manual (Page 26)

C-PRO GIGA HARDWARE MANUAL
Pag. 26
3.4 C-PRO GIGA built-in user interface
The C-PRO GIGA built-in version has a 4x20 alphanumerical backlit LCD display and a keyboard
with 9 buttons and 6 LEDs. Some buttons and LEDs are predefined; this means that their function
has been set by the firmware. Other buttons and LEDs are programmable; that means they may be
freely used within the UNI-PRO development system.
C-PRO GIGA
Built-in Version
The following table shows the functions of the keyboard:
Buttons MAIN FUNCTION SECONDARY FUNCTION
Predefined UP
Predefined DOWN
Predefined LEFT
Predefined RIGHT
Predefined ESC Stand-By command
Predefined ENTER 1st level programming command
Programmable Alarm-off/Detection of alarms
Programmable