Channel Vision IC512 - Manual (Page 2)

2
Model IC512
Installation:
h
h
h
h
h
h
Use the included template to mark and cut a 6” hole in
drywall away from ceiling joists.
We recommend wiring with AWG 16 or larger, stranded
wire.
For proper phasing, both voice coils must be wired alike.
Connect red wires to red terminals on speaker and to red
or plus terminals on amplifier.
Install IC512 in hole. Tighten the mounting screws. The
mounting dog ears will rotate outward and grip the
drywall.
Aim tweeter
To control the volume of the speaker locally, use an
impedance matching volume control, such as the
Channel Vision VC-302.
Mounting screws (4)
3
Specifications:
Frequency range:
Sensitivity:
Power Handling:
Drivers:
Impedance:
Finish:
Dimensions:
Weight:
50Hz - 20kHz ± 3dB
88dB (1W/1m)
100 Watts peak
1- 1” Soft dome tweeter
1- 5
” polypropylene woofer
8 ohms
ABS plastic
8” OD. 4.21 height
(from surface of wall board)
2.25 Lbs as shipped
¼
”
Specifications subject to change without notice.
Features:
5 ” High performance in-ceiling loudspeaker
High power handling capacity
Gold speaker terminals
Proprietary pivoting “Pole Piece” technology with 1” voice
coil, neodymium magnet, and silk soft dome
Mica-filled polypropylene woofer with butyl rubber surround
and a 18 oz magnet
Small perforated designer grille
Recommended power: 20W to 100W (peak)
¼