Chief Manufacturing CM6DH User Manual
Page 10
CM6DH SERIES
Installation Instructions
10
track, or is the motor box bent, causing it to become uncoupled
from the track?
Power Loss - The Status Light will be on solid red. ---- There
has been a power loss (due to an electrical storm, etc.). When
next activated the doors will move at a slow speed to their full
closed position. If the doors are already closed they will not
move. The Status Light will return to solid green and the doors
are ready for normal activation.
Optional Control Input Connections
Control Input- 8 position RJ 45 modular phone jack
Discrete control for use with 3rd party control.
•
Position 8- Open
•
Position 7- Stop
IR Receiver “Eye” input for Eubank, Inc. supplied external IR
reciever only.
•
Position 6 - V out
•
Position 5 - Vcc, 5v
Radio Power for external RF receiver only.
•
Position 4 - 24 VDC
Sequence control for use with 3rd party control.
•
Position 3 - Sequence- Open, Stop, Close, Stop
•
Position 2 - Common
Discrete control for use with 3rd party control.
•
Position 1 - Close
Control Input on Front of Motor Box
Figure 14
NOTE:
Making a momentary dry contact closure between the
common and the open, closed, stop, or sequence will
activate the system in that mode.
Control Input
Figure 15
Control Input on Front of Motor Box