Mo t o r, Drawing a, Drawing b – Fawcett Bridge Mount (Caged) User Manual

Page 9

Advertising
background image

“C” FLANGE – HOLLOW BORE WORM STYLE:

STEP #1. Position key
in Ratio Multiplier Input
Bore. Apply anti-seize
compound to the motor
shaft. Line up the key
with the keyslot and slip
the motor shaft into the
Ratio Multiplier Input
Bore.

STEP 2. Tighten the
supplied 4 bolts with
lockwashers evenly for
a solid fit between
motor and “C” flange.

EXTENDED “C” FLANGE WITH FLEXIBLE COUPLING STYLE:

STEP #1:

Mount one coupling half on motor shaft so that the coupling half and end of key are flush with end of
motor shaft. (See Drawing A)

STEP #2:

Tighten coupling setscrews. Thread locking compound is recommended on all coupling setscrews.
Measure distance from inner face of coupling to motor mounting surface. (See Drawing A)

STEP #3:

Mount other coupling half on the reducer input shaft so the coupling end measures the same distance
to the mounting surface of the “C” flange. (See Drawing B) Tighten setscrews. Key should be flush
with shaft end. Use pipe plug opening in side of “C” flange to loosen, tighten or make any adjustments
in coupling position.

STEP #4:

Align coupling halves and install motor.

STEP #5:

Rotate motor to required position and tighten the supplied four bolts and lockwashers evenly for a
solid fit between motor and “C” flange. Re-install and tighten the pipe plug in the flange access hole.

M

O

T

O

R

"L"

Drawing A

"L"

Drawing B

© Baldor Electric Company

Printed in U.S.A.

LT0066A03

3/02 PROG 5000

Advertising