Fawcett ML-4581 Mixer Lift - Manual (Page 6)

Installation
Your new mixer lift is supplied partially assembled. For
more information, see the parts list pages for general
arrangement drawings.
Valve Handle:
To install the valve handle, simply screw the handle
into the valve. It is removed for shipping purposes
only.
Assembly:
1.) Anchor the base to the floor using either ½”
lag bolts for wooden floors or one piece
concrete anchors for poured floors.
2.) Assemble air hose to inlet port of the valve.
3.) Make sure air control valve is in the center off
position before connecting the air supply.
4.) Have a qualified technician adjust the flow
controls for a steady raise and lowering of the
mixer.
Mixer lift is now ready to operate.
FAWCETT Co, Inc. ML manual 03/06 page 4 of 7