Fawcett MCC Lift - Manual (Page 3)

FAWCETT, Inc. ML manual 03/06 page 3 of 7
Safety
Please follow the below safety precautions. If there are
any questions, please call FAWCETT at 330 659-4187.
Please read this complete manual before trying to operate
your mixer lift. Failure to follow these instructions could
result in serious bodily injury or death.
• Do not touch moving parts while mixer lift is operating.
Do not wear loose-fitting clothes or jewelry around an
operating mixer lift. Keep all hands, feet, clothes,
neckties, necklaces and other objects clear of moving
parts.
• The unit must be anchored to the floor before operating.
• Have a qualified individual bring air to your unit.
Air Cylinder Safety:
The air cylinder is driven by compressed air and under no
circumstances be driven with any other gases. Fluids,
particles, solids or any substance mixed with air, will likely
cause damage to the internal components. Do not allow
corrosive gases or particulate material to enter the
cylinder. Water vapor, oil-based contaminants, or other
liquids must be filtered out.
• Only experienced individuals should adjust the flow
controls located at each port.
• Ambient temperature should not exceed 200°F.
• Beware of any exposed and/or movable parts to prevent
personal and/or property damage.
• Solid or liquid material exiting unit can cause eye or skin
damage. Keep away from air stream.
• Always disconnect air supply before servicing.
• Do not allow air cylinder to “run free” at high speeds in
either direction.
• Always use safety pin when cylinder is extended to
prevent “free fall” if air supply is removed
Receiving
Before removing any packing, visually inspect the exterior
of the shipment for any sign of damage. Should there be
any damage, bring it to the attention of the delivering UPS
or truck line and note the same on the receiving ticket.
Should there be damage you must place a claim with the
truck line. They are the only ones who will pay for the
damage done and you are the only one who can place
that claim.