Fieldmann FZV 2001-E - Manual (Page 18)

FZV 2001-E
18 EN What to do “if…”
10. WHAT TO DO “IF…”
When… Possible cause Remedy
Engine does not
start No current in the socket Check power supply
Defective cable Check the cable, plug, replace or let it
repaired by a skilled person if needed
Defective safety combined
switch /connector
Let it repaired in an authorized service station
Protection against overheating
activated
1. Too deep swath, adjust a shorter swath
depth
2. Roll blocked, remove the obstacle
3. Grass too high, trim the lawn before
beginning the work
Before going on working, wait about 15 min
till the engine cools down
Unusual noise Roll got stuck Switch-off the equipment and wait till the
roll gets stopped completely Remove the
obstacle
Toothed belt slips Let it repaired in an authorized service station
Loose bolts, nuts or other
connecting elements
Tighten all parts, if the noise persists, contact
an authorized service station
Strong vibrations,
noise Cutting blades damaged or
worn-out
Replace the roll for a new one or let it checked
in an authorized service station
Too deep swath Adjust the proper swath depth
Grass too high Trim the lawn before aeration
Insufficient
verticutting Low swath depth Adjust the proper swath depth
Worn-out blades Replace the roll for a new one or let it checked
in an authorized service station
Exhausting channel blocked Empty the collection box and remove
obstacles