Fieldmann FZR 1010 - Manual (Page 8)

EN 8
FZR 1010
Purpose of use | Assembly | Setting the mowing height
5. PURPOSE OF USE
This push reel mower is designed for mowing grass.
It is intended for private use, that is for use around the home and in gardens. Private use constitutes the
maintenance of lawns on a small scale around residential buildings and does not include public areas, sports
stadiums or use in agriculture or forestry.
Important: Due to the high risk of injury to the user, this push reel mower must not be
used for mowing mixed vegetation and roofs or balconies with planted vegetation.
This mower may only be used for the purposes for which it is intended. Any other use will be considered to be
incorrect use. In the event that damage or injury results from incorrect use, the responsibility will always be borne
by the user and not the manufacturer.
Please keep in mind that the product was not designed for use in commercial, business or industrial sectors.
If this mower is used in the commercial, business or industrial sectors or equivalent applications, the validity
of our warranty will become void.
6. ASSEMBLY
Assembling the lawnmower
Fig. 3: Screw the top part of the push handle (12) to the two push handle extension poles (13). For this
purpose, use two bolts M6 x 30 (16) and two hexagonal nuts M6 (17).
Fig. 4: Screw the bottom part A (14), bottom part B (15) and both push handle extension poles (13) together.
For this purpose, use six bolts M6 x 30 (16) and six hexagonal nuts M6 (17).
Fig. 5: First connect one of the bottom parts of the push handle to the mower, then push both bottom parts
of the handle together and connect the second side of the handle as well.
7. SETTING THE MOWING HEIGHT
(FIG. 6)
This mower permits four mowing height settings ranging from 15 mm to 45 mm. When performing this task, pull
out the mowing height adjustment brackets (A) and then slide them into the required height.