Fieldmann FZP 2001-E - Manual (Page 13)

13
OPERATING INSTRUCTIONS ELECTRICAL CHAIN SAW
EN Machine description and content of delivery | General instructions before chain saw use
Content of delivery
Take the machine out of package and check whether the following parts are complete:
ATTENTION! Sharp guides!
Chain saw
Guide
Chain
Guide guard
Oil tank
Operating instructions
If any parts are missing or damaged, please refer to the dealer you purchased the machine from.
4. GENERAL INSTRUCTIONS BEFORE
CHAIN SAW USE
ATTENTION! Never modify the chain saw. Use just original accessories and spare parts.
The manufacturer is not responsible for the damages caused by machine modification
or in the instances when the safety instructions for chain saw operating included in this
operating manual are not observed. Unauthorized modifications or non-original spare parts
can cause serious or fatal injury.
Read carefully the operating instructions.
Always follow „safety instructions».
Check proper assembly and adjustment of chain and guide.
Do not start cutting until sufficient amount of oil gets into the chain.
Improper tightening of chain increases the wear of chain, chain cover and guide and can
cause serious damage of these parts.
Improper manipulation with extension cord can lead to serious motor damage.
ATTENTION!
- Do not use a coiled extension cord.
- Minimum conductor cross-section: 1 mm
2
- Maximum cable length: 30m
- Voltage: 230 V-240V