Fieldmann FDW 2001-E - Manual (Page 10)

FDW 2001 E
10 EN Safety instructions
Never leave the running product unattended.
Allow the product to cool down properly before storing.
Pay special attention if the product is used near children. Always keep the product away from
children. Supervise the children to be sure they will not use the product as a toy.
To increase safety, the electrical installations shall be connected by a qualified electrical
engineer. We recommend installing a residual current circuit-breaker (RCCB) with a response
time of 30mA/30 ms or a device monitoring the earth circuit (talk to your electrical engineer
about the options).
Pulling the power cord from the wall socket by force may cause damage.
To avoid damage of the hose, do not step on it or bend it by force. Do not use the product with
a bent or damaged hose.
Do not run over the power cord with the product.
The product is equipped with a thermal fuse - if the motor or the pump get overheated, the
thermal fuse will turn the appliance off. As soon as the motor or pump cool down, they can
be turned on again. Warning!!! To avoid a risk of a sudden recovery of the thermal fuse,
the appliance shall not be powered via an external device such as a timer or shall not be
connected to a circuit which is periodically turned on and off.
High-pressure jet can be dangerous if handled inappropriately. It is forbidden to direct the jet
at other people, oneself, pets, electrical appliances or the high-pressure washer itself.
Never place the pistol or extension to your ears or eyes.
Should you use an extension cable to the power supply network, it shall be of the waterproof
design.
The manufacturer shall not be liable for damages caused by inappropriate use of the
appliance and accessories (injuries, burns, scalding, fire, food spoilage, etc.).