Controls and usage, Fig. 3 – Flight of Harmony Infernal Noise Machine User Manual

Page 5

Advertising
background image

5/9

CONTROLS AND USAGE

Here is a brief explanation of the controls and their usage, described

in the same order as the signal path (see figure 1).

IMP

Domain, Frequency, Range and Width:

• 

Technically, all four

describe the same Function: what frequency the Imp puts out. The total

possible range of the Imp, however, is from subsonic to ultrasonic, and

accessed in different ways requiring multiple controls for fine-tuning. 

Domain:

• 

 The first stage of frequency selection. Domain selects 

one of four wide bands of the overall range. Four Domain is lowest, One

is highest (in frequency). Four is audio, One is nearly ultrasonic. The One

Domain is where you will find the oddest/most ethereal Noises: static, wind, 

the impression of voices. It has a lot of what seem to be dead spots, but it is

worth the time to wander the Domain and see what can be found.

When modulating the VCO, the greater effect is when the VCO

and the Noise frequencies are closer together, i.e., the effect is

minimal when the VCO is in the bass range and the Noise Domain

is in One, but extremely dominant when similar in frequency.

Frequency:

• 

This is the main frequency control within the selected

Domain - it sweeps over the entire Domain (depending on Range, see

following). The Fine control sweeps up to 1/5 of the size of the band that

Coarse does.

Range:

• 

This controls how wide of a sweep Frequency covers.

Fine control same as with Frequency.

Width:

• 

This one is a bit more esoteric: it controls the “width” of

the band of the current domain that the Fine controls cover, hence the “up

to 1/5”. In Domain 1, wide open is best. In Domain 1 the bands of sound

are very narrow, so it is best to set the width all the way down to find the 

hidden sweet spots.

In other words, a quarter of the possible frequency range is selected

by Domain, and the other controls select how much of that Domain the

frequency control can sweep across. The Coarse joystick is for a broad

sweep  over  the  Domain,  and  the  Fine  joystick  is  for  finding  the  perfect 

“sweet spot”.

2

1

2

3

4

1

2

3

4

Domain

Frequency

Range/Width

fig. 3

Advertising