Flintec 52-02 - Manual (Page 4)

Installation examples
Figure 5 shows the rubber foot Type 52-02 installed under a floor scale. A hook is
mounted on the loading pin, holding the ramp in position.
Figure 5
Figure 6
Figure 7
Figure 6 shows the
Rubber Foot Type 52-
02 installed, under a
tank together with Base
Plate 52-00. Fixation
plates keep the Rubber
Feet in position on the
floor, in case of
vibrating load carriers
or when there is risk for
load carrier being
pushed out of position.
Figure 7 shows
incorrect mounting
which gives a bending
moment in the tank leg.
The rubber foot shall be
positioned on the
centreline of the leg,
see Figure 6.
4