Flintec 52-28 - Manual (Page 5)

52-28 Application Guidlines, Rev. 1.00 September 2012 Page 5 of 8
5. Dimensions and Check Link Orientation
The movement of the load carrier is restricted by adjustable check links with rod ends. During the installation
they have to be adjusted for minimum tension. This assures an optimal accuracy and the best repeatability.
Each check link is designed for a max. force of 5 kN (510 kg).
Fig. 4: Weigh module with check link
Please take care for the correct module orientation when installing the weigh modules.
Fig. 5: Check link orientation