Fredenstein V.A.S. MIC-PRE User Manual
Page 3
Fredenstein V.A.S. Microphone Preamplifier
Installation:
Electrical Safety Warnings:
Do not open the enclosure, hazardous voltages are present inside!
There are no user serviceable parts inside.
If you need to replace the mains fuse, make sure the replacement has the same
rating (0.5AT 250V).
Rear View:
Please connect your microphone input and the output first to the XLR or TRS
connectors located on the back panel. Connect the mains cable to the V.A.S. MicPre
and then to a grounded mains outlet. The power ON/OFF switch is located on the
back panel near the power cable connector (IEC). After the unit is powered on, the
PWR indicator on the front panel will be illuminated.
An unbalanced insert is also provided on the back-panel to connect effect equipment.
Fredenstein V.A.S. MicPre Manual V1.1 Oct. 2, 2014 Page 2