Futaba G154 - Manual

The FP G154/G134 is a single axis rate gyro designed to stabilize aircraft. Like full size aircraft,
stabilisation is accomplished by detecting angular acceleration with the rate gyro. Detected
motion information is fed to the control amplifier, which then sends a counteraction signal to the
appropriate control surface.
FEATURES OF FP G154/G134
• The FP G 154 is for Futaba J M, F and SG Series
(1520 us neutral) digital proportional radio con-
trol sets.
• The FP.G134 is for Futaba E, F. G, H and L Series
(1310 us neutral) digital proportional radio con-
trol sets.
• The gyro body and control amp are small, making
mounting very easy.
•The gyro sensitivity can be easily adjusted with
the gyro output trimmer at the control amp.
• Direction of correcting mix can be switched at the
control amplifier (internal reverse amp switch).
• A very sensitive magnetic motion sensor with
excellent voltage characteristics, linear sensitivity,
high speed response is used. This results in supe-
rior neutral characteristics. Such characteristics
make it ideal for use with the rudder channel of a
model helicopter or in the aileron/elevator chan-
nel of a model aircraft.
• Large 2mm diameter gyro motor shaft for long
life and strength.
• The gyro motor only can be turned on and off by
gyro power switch.