Christie Digital Systems Mirage 6000 - Manual (Page 2)

Brightness
• 6000 ANSI lumens
• Over 90% brightness uniformity
Contrast Ratio (1.5-2.2:1 zoom lens)
• 300:1 ANSI; 800:1 Full Field
Resolution
• True SXGA 1280 x 1024 chip resolution
• 16.7 million displayable colors
• Christie’s 3-DMD™ Optical System
(SLIC™) featuring new Dark Metal
DMDs for improved black level and
contrast ratio
• 13-bit user selectable gamma table
Horizontal Frequency
• 15kHz to 120kHz
Vertical Frequency
• 24 Hz to 120 Hz
Dot Clock
• 160 MHz
Field Interchangeable Optional Lenses
• 1.2:1 Fixed Short Throw
• Zoom lenses: 1.5-2.2:1, 2.2-4:1
and 4-7:1
• Fixed lens mount with horizontal and
vertical lens offset, focus and zoom
adjustment
• Screen size 72" to 480" (1.8m – 12.2m)
diagonal image size (lens dependent)
• Compatible with VistaGRAPHX 0.8:1,
2.5-4:1, 4-7:1 with adapter
• Built-in light shutter
• Lens mount tilt adjustment
• Up to 130% of vertical lens offset
• Up to 80% of horizontal lens offset
Dynamic Scaling
• Resizing processing for computers
and workstations up to 1600 x 1200
resolution
• Independent horizontal and vertical
image size adjustment for graphics and
video
Inputs
• Input 1: Analog RGB 5 BNC for RGBHV,
YPrPb, YCbCr and YUV
• Input 2: Optional plug-in input modules
• Separate, composite sync and sync-
on-green compatible
• HDTV Tri-level sync compatible for all
known HDTV formats
Stereoscopic Source Compatibility
• Active stereo SXGA with vertical refresh
rates up to 108Hz with one field delay,
without frame dropping
• In 3D mode, horizontal frequency:
111kHz maximum
Note: in 3D mode, inputs must be in RGB or
Digital Flat Panel (Optional module)
Enhanced Feature Set
• Constant brightness tracking
(LiteLOC™ - Light Output Control)
• Variable lamp power from 800
to 1200W
• Brightness uniformity control
• Intuitive on-screen display (OSD)
• Service functions can be
password protected
• Multiple language support
• 100 channel memories
• Built-in Stereo 3D ® interface module
• Primary Color Adjustment (PCA™)
• Dark Interval Adjustment (DIA™)
• Auto set-up feature
Control/Networking
• Auto power-up
• Dual RS232 and dual RS422
communication port
• IR Remote keypad
• Front and rear IR receiver
• Optional 2-way controller RS422
• Built-in backlit keypad
Lamp Specification
• 1200W CERMAX Xenon ® lamp
• Color temperature range 3200K
to 9300K
• Over 1000 hours of lamp life
• User replaceable lamp
• Pre-aligned lamp module
Power Requirements
• Voltage range: (auto-switching) AC
220V-240V +/- 10%
• Line frequency: 50 - 60 Hz nominal
• Power consumption: 1700W maximum
• In-rush current rating: 60A maximum
• Current rating: 8.5 Amps maximum
at 200VAC
• Thermal dissipation: 5150 BTU/hr
Environmental
• Operating temperature: 0 - 35° C
• Operating humidity: 20 - 80%
non-condensing
Diagnostics
• Built-in diagnostics LCD display indicates
operational status and error messages
• Power and status LEDs
• Full diagnostics through RS232 9-pin
D connector
Size and Weight
• 88 lbs (39.9 kg)
• 24.48" W x 30.19" L x 11.88" H
• 64.8cm W x 76.7cm L x 30.2cm H
Standard Accessories
• IR wireless remote (with 4AA batteries)
• 8' line cord
• User manual with warranty card
Optional Accessories
• Wired two-way remote controller
(RS422) with LCD display
• Remote IR sensor
• Replacement lamp module
• Multi-standard video decoder (NTSC
3.58, NTSC 4.43, PAL, PAL 60, PAL M,
PAL N, SECAM)
• DVI/DFP module
• Digital HDTV module (SMPTE 292)
• Vista compatible analog input modules
• Compatible with selected third
party switchers
• Service manual
• Librarian communication software
• Arbitrary Gamma Table Software
• Wired remote backlit keypad
• Motorized lens mount upgrade
• Serial Digital Input (SMPTE 259M / CCIR 601)
• 10-bit ADP (Advanced Digital Processing)
used in non-stereo mode
• Transit case
Regulatory Approvals
• Safety: CSA C22.2 No. 950, UL 1950,
EN609050 European Norm "Safety of
Information Technology Equipment"
• Complies with relevant worldwide EMC
and safety standards
• The product complies with FCC Class A
and EN55022 Class A requirements
• This product conforms to all relevant
European directives, standards, safety,
health and environmental concerns and
bares the CE marking
Warranty
• 1 year parts and labor
• Accessories: One year
Mirage 6000
•
Specifications
• The new built-in stereo 3D ® interface
module enables users to view stereo
images in both active or passive mode.
• Primary Color Adjustment (PCA™)
ensures true color representation of
all source images. • LiteLOC™ provides constant
brightness tracking.
F E AT U R E S
Copyright 2002 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks, registered
trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified. MIL5000
Due to constant research,
specifications are subject to
change without notice
.
July 02-NA
WWW.CHRISTIEDIGITAL.COM
Head Offices
USA
10550 Camden Drive
Cypress, CA 90630
PH: +714-236-8610
FX: +714-503-3385
Toll free: (800) 407-7727 (NA only)
[email protected]
CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: +519-744-8005
FX: +519-749-3136
Toll free: (800) 265-2171 (NA only)
[email protected]
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
[email protected]
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
[email protected]
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
[email protected]
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
[email protected]
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
[email protected]