Editing the date and time of an image – Casio EX-Z700 User Manual
Page 168
OTHER SETTINGS
168
5.
Use [
̆], [̄], [̇], and
[
̈] to select the
geographical area you
want, and then press
[SET].
6.
Use [
̆] and [̄] to select the city you want,
and then press [SET].
7.
When the setting is the way you want, press
[SET] to apply it and exit the setting screen.
Editing the Date and Time of an Image
Use the procedure in this section to change the date and
time of a previously recorded image. This capability comes
in handy when the current date and time are wrong due to
the following reasons.
• Because the camera’s clock settings were not configured
correctly when the image was recorded (page 47)
• Because the image was recorded using the wrong World
Time zone (page 167)
1.
In the PLAY mode, use [
̇] and [̈] to display
the image whose date and time you want to
edit.
2.
Press [MENU].
3.
Select the “PLAY” tab, select “Date/Time”,
and then press [
̈].
4.
Set the date and the time you want.