Philips VR302 - Manual (Page 17)

O
Press button
9-
You must now select a TIMER-block.
The display will show, e.g.:
The indication ‘t1’ shows the next free TIMER-block, in this case
TIMER-block number ‘1’.
• If you wish to store the data in another TIMER-block,e.g.
TIMER-block ‘4’, enter the corresponding number.
0 Press button 9-
The video recorder display will show, e.g.:
A tip:
If you press button X, the starting time will automatically be set
to 20:00.
0 Press button 9 again.
The video recorder display will show, e.g.:
A tip:
If you press button X, then the starting time is automatically
transferred as ending time and displayed as such.
O Press button 9 again.
The video recorder display will show, e.g.:
If the display shows another indication, e.g. ‘DAILY’ or ‘WKLY’,
press button SEL one or more times until the display shows
‘DATE’.
Now enter the date of the recording.
Please note:
• It is possible to programme a recording 31 days (1 month) in
advance.
• If, for example, today is the 16th of March and you
programme the date as ‘14’, the recording will be made on the
14th of April.
• For a TV programme starting at midnight, i.e.at 00:00, enter
the date of the following day as the recording date.
0 Press button 9.
The video recorder display will show, e.g.:
Now enter the programme number of the TV channel from which
you wish to record.
© Press button 9 once more to complete the programming.
For awhile the video recorder display will show the following
confirmation e.g.:
Programming a recording which takes place daily or weekly:
Some TV programmes are broadcast every day or every week at
the same time e.g. a serial story in the early evening programme.
You do not need to programme it every time, if you wish to
record all episodes.
You may programme a recording which will take place daily or
weekly at step O. entering the date of the recording.
If you wish to repeat the recording at the same time every
day:
• Programme the TIMER-block as usual introducing the
starting time and the ending time (steps ©to ©).
• When entering the date of the recording press button SEL
until the indication ‘DATE’ is replaced on the display by the
following:
• Now press buttons + or — to enter the date, on which the
first recording is to be made.
• Conclude the programming sequence as usual following
steps © to ©.
If you wish to repeat the recording on the same day and at the
se time every week: •
• Programme the TIMER-block as usual introducing the
starting time and the ending time (steps ©to ®).
@) 13