Philips SHB7103 - Manual (Page 13)

I Muting the microphone
To mute or un-mute the microphone during an active caii press the VOL + and
'
VOL - buttons simultaneously for about a second. A periodic beep tone will be
heard while the mute function is active. The periodic beep tone will stop once
you press the VOL+ and VOL - button simultaneously again.
Adjusting speaker volume
During your call;
* Press and release VOL + to Increase the speaker volume and
* Press and release VOL - to decrease the speaker volume.
A key tone will indicate any increase or decrease of the volume. A higher
pitch signal tone will alert you when the volume level reaches its maximum or
minimum.
Listen to music and monitor your calls at the same time
With the Switchstream feature you can listen to music from your Bluetooth
Stereo enabled phone with A2DP profile support and monitor your calls at the
same time. You will here a ring tone even when you are listening to music while
receiving a call. With the multi-function button you switch from the music to
the incoming call, which will pause the music. Use the same button to end the
active call and return to the music after a few seconds.
Use your headset with your audio
player
The Philips Bluetooth audio adapter (included in the SHB7I02 and SHB7I03
sales package) allows you to add Bluetooth wireless functionality to your Non-
Bluetooth enabled music player, so you can stream music from your player to
your headphone.
Before initial use, pair your headset with the Philips Bluetooth audio adapter
(included in the sales package of SHB7I02 and SHB7I03).
To pair the Bluetooth audio adapter and the headset for first use:
Put your headset into pairing mode:
■ Make sure the headset is off. Press the multi-function button until your