Philips QC5170/60 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Battery Removal
►
This Philips Norelco Clipper contains
rechargeable Nickel Metal Hydride batteries
which must be disposed of properly (fig. 18).
►
Batteries should only be removed when
Clipper is to be discarded.
I For assistance, call toll free: 1-800-243-3050 or
visit our website, vvww.philips.com/norelco.
D Unplug electrical cord from outlet and
Clipper before dismantling Clipper.
a
Allow Clipper to run until the battery is
empty/depleted.
D
Turn Clipper OFF.
D
Remove any comb attachment from the
handle.
B Use a screwdriver to remove the upper
housing part of the Clipper (fig. 19).
□ Use a screwdriver to pry the batteries out of
the Clipper (fig. 20).
Q Cut the wires with household scissors.
Q Do not attempt to replace batteries. Insulate
battery ends by covering with tape and/or
place batteries in a small plastic bag.
□ Discard your Clipper. Do not attempt to
plug electrical cord into the outlet or
recharge the Clipper after the batteries have
been removed.
iQ Contact your local town or city officials
for battery disposal information or call
battery drop-off locations.