Roland VS-890 - Manual (Page 19)

Parameter List
Disk Parameter [SYSTEM] “DISK PRM?” [YES]
Parameter name Display Value, Initial value
IDE Drive lDEDr\' Off, On
SCSI Self ID SCSI Self 0-7
гЛГетро Parameter [SYSTEM] -» “Sync/Tempo?” ^ [YES]
Parameter name Display Value, Initial value
Sync Source Source INT, EXT
Sync Generator Gen. Off, Ml'C, MlDlclk, SyncTr, R-BUS
Error Level ErrLevel 0-5-10
MTC Type MTC Type 30, 29N, 29D, 25, 24
Offset Ofs 00h00m00s00-23h59m59s29 (*)
The settable value for Offset will change slightly depending on the MTC type.
Sync Track Convert
[SYSTEM] “Syncn-empo?” [YES] ^ PARAMETER [
] ^ “Sync.Tr Cnv?” ^ [YES]
Parameter name Display Value, Initial value
Beat Beat 1/1-8/1,1/2-8/2, 1/4-4/4-8/4, 1/8-8/8
Tap Beat T ap Beat 1-4-8
Sync Track Beat Sync Trk Beat 1/1-8/1,1/2-8/2,1/4-4/4-8/4,1/8-8/8
Start Time Start Time 00h00m00s00-23h59m59s29 (*)
End Time End Time 00h00m00s00-23h59m59s29 (*)
Measure Measure 1-999
* The settable value for Start Time/End Time will change slightly depending on the MTC type.
Tempo Map [SHIFT] + [TAP]
Parameter name Display Value, Initial value
Tempo Map Number (none) 1-501
Tempo (none) 25.0-250.0120.0
Measure MEASURE 1-9991
Beat BEAT 1/1-8/1,1/2-8/2,1/4-8/4,1/8-8/84/4
Scene/Automix [SYSTEM] “Syncn'empo?” [YES]
Parameter name Display Value, Initial value
Scene Mode Scene Mode All, KeepM
Auto Mix Mode A.Mix Mode Off, On
Auto Mix Snapshot Mode A.Mix Snap ALL, MaskM
Erase From (none) 0-999
Erase To (none) 0-999
Erase Mode Erase Mode Event Marker
e Initialize [SYSTEM] -»“Drivelnitlalize?” ^ [YES]
Parameter name Display Value, Initial value
Initialize Drive Init Drive IDE, SC0-SC7
Physical Format PhysicalFmt Off, On
Partition Partition 500, 1000 MB
Surface Scan SurfaceScan Off, On
19