Philips VSS2286/00T - Manual (Page 15)

Technical specification
SYSTEM MONITOR
Picture tube
Camera selection
Audio
Buiit-in microphone
Mains power supply
Power consumption
Camera power supply
Max. camera cable length
System cable type
Length of supplied system cable
In/output system:
camera AN, intercom,
alarm, action,
In/output VCR AN
Output slave monitor AN
Output alarm relay (type/tìme)
Alarm buzzer time
Intercom call buzzer time
Camera-LED(s) alarm blinking freq.
Dimensions (WxHxD)
Weight
Ambient conditions
temperature (Operating/Storage)
humidity (Operating/Storage)
VSS2285/00T [VSS2286/00T]
12 731cm
1 ~4
one-way, two-way prepared
electret
100 - 240 Vac, 50 - 60Hz
16 Watt max.
22 V DC, short-circuit protected
200 m
4-wire twisted pair “telephone" cable
25 m
RJ 11 E type modular "telephone"
socket
cinch connectors
cinch connectors
3-pole screwblock/ 3 minutes
15 sec
2 sec
1 Hz (last alarm) / 8 Hz (previous alarms)
320 X 310x310 mm
5.7 kg
+10-+45'C/-25-+70'’C
20% - 90%RH / 99%RH
CCD CAMERA
Pick-up device
No. of picture elements (H) x (V)
Horizontal resolution
Light sensitivity
Spectral sensitivity range
Signal to noise ratio
Output
AN
Built-in microphone
Lens type
Lens viewing angle
focal length
relative aperture
focus range
Power supply
Power consumption
System cable
Tripod socket
Dimensions (WxHxD)
Weight
Ambient conditions
temperature (Operating/Storage)
humidity (Operating/Storage)
VCM8935/00T [VCM8936/00TI
1/3“ (Solid state CCD)
362 X 582 (CCIR) / 362 X 492 (EIA)
> 280 TVL
2.5 - 30000 lux
400 - 1000 nm
>48 dB
RJ 11 E modular “telephone" socket
electret
built-in
64.4°H
X 49,6°V [31 °H X 23,6'V]
3.8 mm [8 mm]
F2.0
1 ~ oo ni [0.5 - oo m; macro 0.05 oo 0.5 m]
9.6 - 27 V DC (via system cable)
50 mA (at 24 Vdc)
4-wire twisted pair "telephone" cable
1/4" B.S.W.
70 X 70 X 54 mm (inci. lens) [70 x 70 x 59 mm]
130 gr
Ammonia resistent
-20~+55°C/-25~+70°C
20% - 90%RH / 99%RH
Specifications may be changed without notice.
63