Cary Audio Design SLP 03 - Manual (Page 13)

CONTROLS AND DISPLAYS
12
REMOTE CONTROL
This section explains how best to use the remote control to operate the SLP 03.
1. POWER: Use to turn the power
on and off.
2. MUTE: Use to mute the sound.
Press again to resume sound.
3. VOLUME: Use the buttons to
adjust the volume of the SLP 03
from Volume 0 to Volume 63.
4. BALANCE: Use the buttons to
fine-tune the relative balance of
the Left and Right channel from
your listening position using the
balance buttons in 1 dB
increments.
5. INPUT SELECTOR: Use the
buttons for remote selection of
the various inputs of the SLP 03.
6. BRIGHT: Use this button to cycle
through four levels of brightness
(including OFF) for the display,
allowing adjustment for various
ambient lighting conditions.
7. INPUT SOURCE: Input source is selected by pressing their respective buttons.