Connecting to the mains power supply, Some general notes for subsequent operation – Philips VR 337 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting to the mains power supply
O
Insert the female plug of the mains cable into the
mains socket LTSd at the back of the video recorder.
© Plug the other end of the mains cable into the wall
socket.
Some general notes for subsequent
operation
• Keep your video recorder connected to the mains at
all times to ensure that programmed recordings can
be made and that the television functions. The
power consumption required for this is very low.
• The video recorder switches on automatically as
soon as you insert a cassette or press the button
I
PAUSE/STOP II ■"!
If you switch your video recorder off using the
I
BEREITSCHAFT
(!) I button, the current time will appear
in the display, e.g.: '20:00'.
If the clock has not been set, the display will flash.
Ori.nn
I— U'UU