Crestron electronic CNRFGWA-418 - Manual (Page 24)

ISYS I/O WIFI & HANDHELD REMOTES
Handheld Remote Accessories
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
wifi & handheld remotes
IR GATEWAYS
C2N-IRGW-F IR Gateway, Flush Mount
The C2N-IRGW-F IR Gateway is a 1-way infrared
receiver for Crestron IR wireless handheld remotes and
touchpanels. It is also compatible with any third-party
IR remote utilizing the RC5 command set.
The C2N-IRGW-F is designed to install flush into any
drywall or ceiling tile surface. Its visible face consists of
a smoked plastic lens measuring 1-1/2 inch diameter.
The C2N-IRGW-F is a Cresnet device compatible with
any 2-Series control system.
SPECIFICATIONS
IR Wireless
IR Frequency: 36 to 38 kHz IR
Formats: Crestron format, RC5
Range: Up to 50 ft line of sight (typical), dependent upon
angle, obstructions, IR interference, and IR remote signal
strength
Connections
~10 inch (~25 cm) 4-wire pigtail
Connects to Cresnet control network
LED Indicators
(1 red) Indicates IR signal reception, Cresnet network
communication, and setup/update functions
Controls
(1) Recessed miniature pushbutton for setup
Power Requirements
Cresnet Power Usage: 1 Watt (0.04 Amps @ 24 Volts DC)
Environmental
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Cylindrical plastic, drywall or ceiling tile mountable in a 1 inch
(2.54 cm) diameter round hole
Dimensions
Diameter: 1.50 in (3.81 cm)
Depth: 2.19 in (5.54 cm)
Weight
0.9 oz (25.52 g
150