Cobra Electronics PRO 7080 - Manual (Page 6)

Settings
Your Detector
Nothing comes close to a Cobra ® 7
Settings
Your Detector
6 English
Settings
•
When changing the Settings on your detector, please keep in mind:
n All settings will be stored in memory when the power is
turned Off and recalled when the power is turned back On.
Highway/City Mode
Setting your detector to City mode delays all X band audio alerts at lower
signal strength levels. (A single beep will sound when the signal is first
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conflicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear as you complete each step. The factory setting
is
Highway mode.