Giga Tent CT 025 User Manual
MODEL # CT025/ My First Summer Home
Dimensions: 54'' x 45'' x 54''(H)
Confirm product contents by emptying contents of bag(s) and confirm-
ing all parts are included and undamaged.
Select a smooth level site and spread out your tent.
Remove the folded poles from the carry bag and assemble all sections.
Lay the opened poles next to the play tent.
There are 2 sets of poles in the shape of a rectangle; 1 large and 1 small.
Take the larger one and lay it on the ground with the cornersockets
facing up this is the base. (figure A)
Next, take one of the 2 sets of poles shaped like a V and place the ends
into the corner sockets on the short end of the base making sure that the
3 sockets are facing into the tent,repeat for the other V shaped pole.
There are 3 poles made up of 2 sections, these connect the walls
together. Take these poles and insert the ends into the sockets on the
front and rear sets of poles. The sockets are located at the bends in the
poles. The tent body is complete except for the cover. (figure C)
Take the play tent and drape it over the frame. (figure D)
Assemble the porch frame by inserting the ends of the four1 piece-
poles into the corner sockets on the smaller rectangle. (figure E)
Turn this on its side and insert the ends of the 4 poles into the pole
pockets located underneath the porch roof and on top of the porch
floor. Attach to the outside of the porch frame using the Velcro tabs on
the roof and floor.
Fold the sides of the roof down to cover the end of the frame.