GIN Nano - Manual (Page 11)

11
5. Care, Maintenance and Repairs
The materials used in the Nano 2010 have been carefully selected for maximum durability.
Nevertheless, following the guidelines below will help keep your glider airworthy and will
ensure a long period of continuous safe operation. Excessive wear is caused by careless ground
handling and packing, unnecessary exposure to UV light, chemicals, heat and moisture.
Ground handling
The following should be avoided:
Violent shocks to the upper surface (e.g. when the canopy crashes to the ground leading
edge first whilst ground handling).
Dragging the glider along the ground.
Stepping or skiing on the lines or canopy. Dyneema, the core material of the lines, is very
strong, can take high loads without stretching, but is sensitive to heat.
Opening your wing in strong winds without first untangling the lines.
UV damage
Avoid leaving the glider out in the sun unnecessarily. UV rays from the sun degrade glider cloth.
Packing instructions
We advise you to pack the glider “accordion wise” as shown in the drawing. This packing
procedure takes slightly longer and is easier to do with an assistant, but it conserves the
rigidity in the profile reinforcements.
Since folding the glider weakens the materials, pack the glider as loosely as possible.