Hazard warning flashers, Turn and lane-change signals, Hazard warning flashers on – GMC 2012 Canyon User Manual

Page 138: Hazard warning flashers -4 turn and lane-change, Signals -4

Advertising
background image

Black plate (4,1)

GMC Canyon Owner Manual - 2012

6-4

Lighting

If the vehicle is started in a dark
garage, the automatic headlamp
system will come on immediately.
Once the vehicle leaves the garage,
it will take about 1 minute for the
automatic headlamp system to
change to DRL if it is light outside.
During that delay, the instrument
panel cluster may not be as bright
as usual. Make sure the instrument
panel brightness control is in the full
bright position. See Instrument
Panel Illumination Control on
page 6‑6
.

Hazard Warning Flashers

|

(Hazard Warning Flasher):

Press this button located on the
instrument panel, to make the front
and rear turn signal lamps flash on
and off. This warns others that you
are having trouble.

Press

|

again to turn the

flashers off.

The turn signals do not work while
the hazard warning flashers are on.

Turn and Lane-Change
Signals

Move the lever all the way up or
down to signal a turn.

Raise or lower the lever until the
arrow starts to flash to signal a lane
change. Hold it there until the lane
change is complete.

The lever returns to its starting
position when it is released.

Advertising