GMC 2001 Envoy User Manual
Page 280
5-6
8. Now connect the black
negative (
-
) cable to
the good battery’s
negative (
-
) terminal.
Don’t let the other end touch anything until the next
step. The other end of the negative (
-
) cable doesn’t
go to the dead battery. It goes to a heavy, unpainted
metal part on the engine of the vehicle with the
dead battery.
9. Attach the cable at least
18 inches (45 cm) away
from the dead battery,
but not near engine parts
that move. The electrical
connection is just as
good there, but the
chance of sparks getting
back to the battery is
much less.
10. Now start the vehicle with the good battery and run
the engine for a while.
11. Try to start the vehicle with the dead battery. If it won’t
start after a few tries, make sure all connections are
good. If it still won’t start, it probably needs service.