GME GX620 - Manual (Page 7)

GX620 INSTRUCTION MANUAL PAGE 7
BATTERY CHARGING
To charge your radio, there are 2 options. Prior to charging, disconnect any radio
accessories and ensure the radio is switched OFF. Then carefully follow one of the
following options:
1. Connect the 12 V in-dash adaptor to a 12 V socket:
a. Connect the female adaptor power plug to the charging cradle.
b. Insert the radio into the charging cradle until it ‘clicks’ home. The charger LED
will glow red and charging will start. If the charger LED blinks red and green
or the charger LED does not light, re-insert the radio into the charging cradle.
When the battery is fully charged the charger LED will turn green.
c. The battery charging time is typically 4 to 5 hours.
2. Connect the 12 V in-dash adaptor to a 12 V socket:
a. Remove the jack cover on the side of the radio and connect the male adaptor
into the top accessory jack. The charging cradle is not required for this option.
b. The battery charging time is typically 8 to 10 hours via the accessory jack.
OR
(or optional Power Adaptor)