GME TX665 User Manual

Page 18

Advertising
background image

PA G E 1 8

I N S T R U C T I O N M A N UA L T X 6 6 5

To set the Squelch

1. Hold the MENU key for 2 seconds. The channel number will flash.

2. Press the MENU key repeatedly until ‘Sq’ is displayed. The current Squelch level

will flash.

3. Press the or keys to adjust the Squelch level from 1 (most sensitive) to

5 (least sensitive) or select AUT (Auto) for an automatic setting.

4. Press the PTT to confirm and store your selection.
ROGER BEEP TONE
The Roger Beep is a tone that is automatically transmitted whenever the PTT is
released. This tone serves to alert the receiving party that your transmission
has ended.
To Enable or Disable the Roger Beep Tone

1. Hold the MENU key for 2 seconds. The channel number will flash.

2. Press the MENU key repeatedly ‘Rb’ is displayed. The

icon will be flashing.

3. Press the or keys to select ‘on’ or ‘oF’.

4. Press the PTT to confirm and store your selection.
BUTTON BEEP
The Button Beep allows the radio to sound a confirmation beep whenever the keys are
pressed. It also generates a confirmation tone whenever the radio is switched on.
To Turn the Button Beep On or Off

1. Hold the MENU key for 2 seconds. The channel number will flash.

2. Press the MENU key repeatedly until ‘bP’ is displayed. The

icon will

be flashing.

3. Press the or keys to select ‘on’ or ‘oF’.

4. Press the PTT to confirm and store your selection.

When the Button Beep is enabled the

icon will be displayed.

CALL ALARM SELECTION
The radio provides 5 user-selectable Call Alarm melodies to alert other users to your
incoming call. When enabled, the melody can be transmitted to another user where it
will be heard in the speaker of the receiving radio.
To Select your Favourite Call Alarm Melody

1. Hold the MENU key for 2 seconds. The channel number will flash.

2. Press the MENU key repeatedly until ‘CL’ is displayed. Call number 1 – 5 or ‘oF’

will be flashing.

3. Press the or keys to preview (listen to) the 5 available Call Melodies (1 – 5).

NOTE:

You will not be able to preview the Call Alarm Melodies unless the Button

Beeps have been enabled.

Advertising
This manual is related to the following products: