GME G142CFD - Manual (Page 6)

G - C O M B O I N S T R U C T I O N M A N UA L PA G E 7
1-1 General Information
The chartplotter is a precision-crafted GPS chartplotter with a
high-performance receiver for the Global Positioning System
constellation of satellites, providing precise location data with
a host of navigation features. Some functions require optional
units and sensors installed on your boat.
The chartplotter can be connected to external devices
with NMEA0183 and NMEA2000 interface and display
information.
Examples.
• NAVTEX
• AIS receiver
• DSC VHF radio
• Transducer and sensors
• Autopilot
1 INTRODUCTION
1-2 Specification
G142C
GENERAL
Category
Detail
Size 164 mm(H) x 183 mm(W) x 74 mm(D)
Display 142 mm (5.6”) diagonal, TFT colour, 480 x 640 pixels.
Supply voltage 10 to 34 V DC
Supply current 13.8 V
350 mA min - no backlighting.
480 mA max - full backlighting.
External beeper or light output Switched to ground to sound alarm, 30V DC, 200 mA maximum
Operating temperature -10° to 50°C
ALARMS
User set: Arrival radius, anchor, XTE, danger, low battery, loss of DGPS fix, dangerous AIS vessels.
GPS NAVIGATION
Chart card
C-MAP™ SD Card (NT-MAX, NT+ or NT)
User card SD Card. Maximum Memory size is 1GB standard, 4GB SDHC.
Waypoints Up to 10,000, with default or user defined alphanumeric names up to eight
characters.
Routes 100 Routes, with up to 100 points each
Tracks By time or distance, 10 tracks of 15,000 points
Chart datums 216 Chart datums, One user-defined map shift.
Chart scale 0.2 to 500 nm for chart (chart dependent) down to 0.005 nm in plotter mode.
COMMUNICATIONS
NMEA
NMEA 0183 4800, 9600, 38400 baud, NMEA 2000
NMEA 0183 Inputs from
compatible instruments DBK, DBS, DBT, DPT, GGA, GLL, GNS, GGA, GSV, HDG, HDT, MDA, MTA, MTW,
MWD, MWV, RMC, RPM, VHW, VTG, VWT, ZDA