GME TX2700 - Manual (Page 10)

PAGE 10 INSTRUCTION MANUAL TX2700
ELECTRICAL
General
Complies With: AS4367 and
AS/NZS4355 (Australia only).
Frequency Range: 26.965 – 27.405 MHz
Channel Set: Australian 27 MHz
Citizens Band.
Modulation: AM (A3E)
Supply Voltage: • 12.6 V DC nominal
• 10.8 – 15.2 V DC range.
Frequency Error: < 50 PPM over temperature
range.
Dual Watch: Monitor time – 250 ms
Monitor period – 2 seconds.
Scan Rate: 5 channels/second
Transmitter
Modulation Frequency
Response: 300 Hz to 3 kHz, + 1 – 3 dB
Max Modulation Depth: 100%
Carrier Output Power: 4 watts max
Microphone Level @ 1 kHz
for 60% Modulation: 1 Pa
Spurious Emissions: < – 26 dBm
Receiver
Demodulated Frequency
Response: 300 Hz to 3 kHz, + 1 – 3 dB
Receive Sensitivity
for 12 dB SINAD @
30%Modulation: - 110 dBm
Max Squelch: < - 80 dBm
Adjacent Channel
Sensitivity: ≥ 55 dB
Spurious Response
Immunity: ≥ 55 dB
Conducted Spurious
Radiation: – 57 dBm
Audio Output Power
8 Ohms: 2.5 watts
MECHANICAL
Dimensions: 51 (H) x 94 (D) x 170 (W) mm
Weight: 450 grams
ENVIRONMENTAL
Temperature Range: – 10°C to + 60°C
The TX2700 will operate over the 26-30 MHz frequency
range. For information specifi c to frequencies outside of the
Australian CB bands, please refer to the appropriate amend-
ment, or contact GME at: [email protected]
SPECIFICATIONS
Specifi cations are typical unless otherwise indicated and may be subject to change without notice or obligation.