GME GD9520 User Manual
Page 12
PA G E 1 2
I N S T R U C T I O N M A N UA L
G D 9 5 2 0
Part Number: 310395 Drawing Number: 4 3 7 8 7 - 2
WARRANTY
GME limit this warranty to the original purchaser of
the equipment.
GME warrant this product to be free from defects in
material and workmanship for a period of twelve (12)
months from the date of purchase from their
authorised retailer.
Should the product require servicing during this period, all
labour and parts used to effect repairs will be supplied free
of charge. GME reserve the right to determine whether
damage has been occasioned by accident, misuse or
improper installation whereby the warranty would be
void, including:
Equipment which has been damaged due to:
(a) Incorrect or reverse polarity connection to a battery or
power supply.
(b) Connection to incorrect supply voltage.
(c) Effects of water or moisture penetration.
(d) Non-factory modifications.
(e) Use of incorrect replacement fuse.
Procedure to be followed by claimant: In the event of a
defect occurring during the twelve (12) month warranty
period, the original purchaser may return the defective unit
along with suitable proof of purchase date (i.e. receipt,
docket, credit card slip etc.) and a full description of the
defect to any authorised retailer.
All freight charges incurred for transportation by the retailer
or GME are the purchaser’s responsibility.
The retailer will forward the unit to the closest authorised
GME Service Depot in your particular area.
GME AFTER SALES SERVICE
Your GME GD9520 is especially designed for the
environment encountered in mobile or portable
installations. The use of all solid state circuitry, careful
design and rigorous testing, result in high reliability. Should
failure occur however, GME maintain a fully equipped
service facility and spare parts stock to meet the customer’s
requirements long after expiry of the
warranty period.
Warning:
Extreme care should be taken when connecting
any external device to your GD9520 rear inputs or outputs.
GME strongly recommends that all connections should be
carried out by a suitably qualified technician.