Great Planes Avistar Elite .46 RTF - GPMA1605 - Manual (Page 8)

8
❏
8. Install the included AA alkaline batteries into the receiver
battery holder. Rewrap the the battery holder with the foam
rubber and securely strap it in place next to the receiver.
Reconnect the battery holder to the switch harness.
Install the Propeller
❏
1. Slide the spinner backplate onto the engine crankshaft.
❏
2. Align the propeller with the marks on the spinner backplate
and then tighten the engine nut securely, using a 10 mm wrench
or crescent wrench.
❏
3. Fit the spinner cone to the back plate, then use a Phillips
screwdriver to tighten the spinner screws snug but not over tight.
Install the Wing
❏
1. Fit the servo leads in the wings through the holes in the
underside of the wing panels.
❏
2. Insert the aluminum wing joiner tube into one of the
wing panels.