Great Planes ElectroStik EP RxR - GPMA7500 - Manual (Page 4)

Optional Supplies & Tools
Here is a list of optional items mentioned in the manual that
will help fi nish the ElectroStik EP RXR. Order numbers are
provided in parentheses.
❏
Stick-on segmented lead weights (GPMQ4485)
❏
Top Flite ® MonoKote ® sealing iron (TOPR2100)
❏
Top Flite Hot Sock ™ iron cover (TOPR2175)
❏
Top Flite MonoKote heat gun (TOPR2000)
❏
C.G. Machine ™ (GPMR2400)
❏
Precision magnetic prop balancer (TOPQ5700)
❏
Threadlocking compound (GPMR6060)
❏
Drill bits: 1/16" [1.6mm], 5/64" [2mm], 1/8" [3.2mm]
❏
Panel line pen (TOPQ2510)
❏
Rotary tool such as Dremel ®
❏
Rotary tool reinforced cut-off wheel (GPMR8020)
❏
AccuThrow ™ defl ection gauge (GPMR2405)
❏
Hobbico ® pin vise 1/16" collet w/6 bits (HCAR0696)
❏
Hobbico 7-piece ball tip hex L-wrench
metric (HCAR0521)
❏
Great Planes clevis installation tool (GPMR8030)
…And If You Really Want to Go Nuts
❏
Cooler fi lled with ice and soda
❏
Folding table
❏
Lawn chairs
❏
EZ-up or canopy for shelter
❏
First-aid kit
❏
Paper towels
❏
Spray-on glass cleaner
❏
Sunglasses
❏
Sun block
IMPORTANT BUILDING NOTES
• When you see the term test fi t in the instructions, it
means that you should fi rst position the part on the assembly
without using any glue, then slightly modify or custom fi t
the part as necessary for the best fi t.
• Whenever the term glue is written you should rely upon
your experience to decide what type of glue to use. When
a specifi c type of adhesive works best for that step, the
instructions will make a recommendation.
• Whenever just epoxy is specifi ed you may use either
30-minute (or 45-minute) epoxy or 6-minute epoxy. When
30-minute epoxy is specifi ed it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
• Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
• The ElectroStik EP RXR is factory-covered with Top Flite
MonoKote fi lm. Should repairs ever be required, MonoKote
can be patched with additional MonoKote purchased
separately. MonoKote is packaged in six-foot rolls, but
some hobby shops also sell it by the foot. If only a small
piece of MonoKote is needed for a minor patch, perhaps a
fellow modeler would give you some. MonoKote is applied
with a model airplane covering iron, but in an emergency a
regular iron could be used. A roll of MonoKote includes full
instructions for application. Following are the colors used on
this model and order numbers for six foot rolls.
Missle Red – TOPQ0201
Jet White – TOPQ0204
• The stabilizer and wing incidences and engine thrust
angles have been factory-built into this model. However,
some technically-minded modelers may wish to check these
measurements anyway. To view this information, visit the web
site at www.greatplanes.com and click on “Technical Data.”
Due to manufacturing tolerances which will have little or no
effect on the way your model will fl y, please expect slight
deviations between your model and the published values.
ORDERING REPLACEMENT PARTS
Replacement parts for the Great Planes ElectroStik EP RXR
are available using the order numbers in the Replacement
Parts List that follows. The fastest, most economical
service can be provided by your hobby dealer or mail-order
company.
To locate a hobby dealer, visit the Hobbico web site at
www.hobbico.com. Choose “Where to Buy” at the
bottom of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
® or MasterCard ®
number and expiration date for payment. Mail parts orders
and payments by personal check to:
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason, contact Product
Support by e-mail at [email protected],
or by telephone at (217) 398-8970.
4