Great Planes P-51 Mustang Sport Fighter .46 EP ARF - GPMA1208 - Manual (Page 15)

15
❏
7. Install a 6" [152mm] servo extension on the ESC speed
control. Secure the connection with tape or heat shrink tubing.
❏
8. Install one half of the provided Velcro ® to the back of
the ESC and the other inside the fuselage. Cut the Velcro as
needed to fi t properly.
❏
9. Install the ESC inside of the fuselage. Plug the motor
wires into the ESC and the servo lead into the receiver
following the instructions with the ESC.
❏
10. Install your battery, securing it with the included Velcro
strap. Cut the Velcro to fi t your battery.
❏
11. For proper cooling, with a sharp hobby knife remove
the covering from the pre-cut holes in the rear of the fuselage.
Note: This completes the motor installation. Move ahead to
page 18 to complete the assembly of the airplane.