Set the control throws – Great Planes Rifle 1M EP Sport ARF - GPMA1806 User Manual

Page 16

Advertising
background image

16

6. Place the Rifl e on the C.G. stand supported by the

dowels on the tape strips on the bottom of the wing. If
necessary, remove the wing to adjust the location of the
battery so the Rifl e balances at the middle marks 1-3/16"
[30mm] from the leading edge of the wing. NOTE: The Rifl e

fl ies well balanced anywhere between the forward and aft
balance marks, but for initial fl ights we advise beginning at
the recommended point.

7. Once you fi nd the location of the battery that allows

the Rifl e to balance, remove the wing and mark the battery
location so it will be repeatable out at the fl ying fi eld.

8. Bevel the front of the included plastic “battery spatula”

and slide it under the battery for easier removal.

Set the Control Throws

1. Remove the propeller and spinner.

2. Connect the battery to the ESC and turn on the

transmitter. If necessary, adjust the sub-trims in your
transmitter so the ailerons and elevator are centered.

3. Measure the throws and use the programming in your

transmitter to make adjustments as necessary. NOTE: The
throws are measured at the widest part of the elevator and
ailerons.

Advertising