Preparations, Install the aileron servos, pushrods and belly pan, Kit contents – Great Planes U-Can-Do SF EP/GP .80 ARF - GPMA1272 User Manual
Page 6

6
PREPARATIONS
❏
1. If you have not done so already, remove the major parts
of the kit from the box and inspect for damage. If any parts
are damaged or missing, contact Product Support at the
address or telephone number listed in the “Kit Inspection”
section on page 5.
❏
2. Remove the tape and separate all the control surfaces.
Use a covering iron with a covering sock on high heat to tighten
the covering if necessary. Apply pressure over sheeted areas
to thoroughly bond the covering to the wood.
INSTALL THE AILERON SERVOS,
PUSHRODS AND BELLY PAN
CUT OFF
UNUSED
ARMS
❏
1. Center your aileron servos with your radio system.
Test fi t four-armed servo arms onto the servos to determine
their best orientation so that the arms are closest to being
KIT CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Cowl
Fuselage
Canopy Hatch
Wing / Ailerons
Vertical Fin / Rudder
Horizontal Stabilizer
Elevator Halves
Fuel Tank
Spinner
Engine Mount
Landing Gear
Wheels
Side Force Generator
Kit Contents
1
11
6
2
12
13
13
4
8
9
10
7
3
5