Great Planes Piper J-3 Cub 40 Kit - GPMA0160 - Manual (Page 4)

For the best scale effect, an OS .48 Surpass 4-cycle is
ideal. For maximum aerobatics, an OS .70 Surpass 4-cycle
is all the power you will need.
This kit includes a Great Planes EM4070 engine mount
that fits most .40 - .60 2-cycle engines and most 40 - .70
4-cycle engines.
This kit includes everything you need to build either the
standard or the clipped wing for your Cub. Both versions fly
extremely well and are equally easy to construct. The
standard wing makes the Cub a real “Floater” giving you
plenty of time to think about your maneuvers. The clipped
wing allows things to happen a bit quicker. Snaps, rolls and
spins can be performed faster and more precisely. Either
way, the model flies much like the real plane.
If you install a 2-cycle engine, we recommend using a
muffler that can be partially enclosed inside the cowl. The
muffler shown in the instruction book photos is a Slimline
#3217 Pitts Style Muffler for OS MAX .61SF and .60FP
engines. If you use a OS .40SF or .46SF use a Slimline
#3218 Pitts Style Muffler or similar. Most standard mufflers
will require an extension to clear the fuselage sides.
❏
Engine, prop nut, and suitable propellers
❏
4-Channel radio with 4 standard servos
❏
1/4" [6mm] R/C foam rubber (HCAQ1000)
❏
10 or 12 oz. Fuel tank (GPMQ4104 or GPMQ4105)
❏
3' [900mm] Standard silicone fuel tubing (GPMQ4131)
❏
3-3/8" Main wheels, Cub Style (GPMQ4230)
❏
1-1/4" Tail wheel (GPMQ4242)
❏
(4) 3/16" Wheel Collars (GPMQ4308)
❏
(2) 3/32" Wheel Collars (GPMQ4302)
❏
(2) Rolls Top Flite ® MonoKote ® covering (TOPQ0220,
Cub Yellow)
In addition to common household tools (screwdrivers, drill,
etc.), this is the “short list” of the most important items
required to build the Piper J-3 Cub .40.
We recommend
Great Planes Pro ™ CA and Epoxy glue.
❏
2 oz. Thin Pro CA (GPMR6003)
❏
2 oz. Medium Pro CA+ (GPMR6009)
❏
Pro 6-minute epoxy (GPMR6045)
❏
HobbyLite ™ balsa-colored balsa filler (HCAR3401)
❏
Plan Protector ™ (GPMR6167) or wax paper
❏
Drill bits: 1/16" [1.6mm], 5/64" [2.0mm], 3/32" [2.4mm],
7/64" [2.8mm], 1/8" [3.2mm], 9/64" [3.6mm],
11/64" [4.4mm], 3/16" [4.8mm], 1/4" [6.4mm]
❏
Small metal file
❏
Stick-on segmented lead weights (GPMQ4485)
❏
Silver solder w/flux (GPMR8070)
❏
#1 Hobby knife (HCAR0105)
❏
#11 Blades (100-pack, HCAR0311)
❏
Single-edge razor blades (10-pack, HCAR0212)
❏
Small T-pins (100, HCAR5100)
❏
Medium T-pins (100, HCAR5150)
❏
Sanding tools and sandpaper assortment (see Expert
Tip–Easy-Touch ™ Bar Sander section on page 5)
❏
Top Flite ® MonoKote ® sealing iron (TOPR2100)
❏
Top Flite MonoKote heat gun (TOPR2000)
Here is a list of optional tools mentioned in the manual that
will help you build the Piper J-3 Cub .40.
❏
Pro Aliphatic resin (2 oz. [60g], GPMR6160)
❏
2 oz. [57g] Spray CA activator (GPMR6035)
❏
CA applicator tips (HCAR3780)
❏
CA debonder (GPMR6039)
❏
Epoxy brushes (6, GPMR8060)
❏
Mixing sticks (50, GPMR8055)
❏
Mixing cups (GPMR8056)
❏
Razor plane (MASR1510)
❏
Builder’s triangle set (HCAR0480)
❏
36" Metal ruler (HCAR0475)
❏
Curved-tip canopy scissors (for trimming plastic parts,
(HCAR0667)
Optional Supplies & Tools
Covering Tools
Adhesives & Building Supplies
Required Accessories
REQUIRED ITEMS
Muffler Selection
Wing Configuration
4