Great Planes 25% Pitts M-12S 50cc ARF - GPMA1421 - Manual (Page 11)

11
Install the Landing Gear
❏ ❏
1. Look closely at the
landing gear legs. You will
notice one side is straight and
the other is slightly angled. The
straight side is the leading edge
of the gear. Determine the right
gear from the left. Then insert
one of the gear legs into the slot
in the side of the fuselage.
❏ ❏
2. Secure the landing gear to the fuselage with three
8-32 x 3/4" [19.1mm] socket head cap screws, #8 lock
washers and a drop or two of thread locker.
❏
3. Repeat this for the other landing gear leg.
Install the Upper and Lower Wings
❏
1. Install the lower wing to the fuselage with four
1/4-20 x 2" [51mm] nylon wing bolts.
❏
2. Locate the lower wing belly pan. Place in onto the
bottom of the lower wing. Mark the outline of the belly pan to
the bottom of the wing with a fi ne tip felt marker.